Product Description
Product Profile
- The main equipment of sound wave drilling is the vibration rotary power head, and the power head can be generated High frequency vibration and low speed rotation can be adjusted by repeated swinging around the equilibrium point And form vibration, energy accumulation in the drill pipe, when reaching its natural frequency, cause resonance andGet release, transfer, energy through the efficient transfer of the drill pipe, so that the drill pipe and drill bit constantly to the rock Into the soil. The vibration wave energy is ertically transmitted to the drill column, and the frequency can generally reach
3000-6000 times / minute, and the impact power can reach 3~20 tons. Due to the lower mechanical wave vibration range, can Cause people's hearing, so the habit is called sound wave drilling.
- Widely used in engineering survey, environmental protection survey hole, ground source heat pump hole, sand and gold Geological exploration, dam and tailings monitoring hole, Marine engineering survey, drilling and sampling of dam foundation And grouting, and micro-piles, well holes, etc.
- Wide formation adaptation range: In the deep accumulation of 0-100 meters, all kinds of loose layers, such as sand, silt, clay, gravel, coarse gravel, gravel, moraine, gravel pile, garbage accumulation, and soft rock, can effectively, high speed continuous original sampling and drilling, as well as a full set of pipe holes.And this is incomparable to the traditional drilling method.
- Fast hole-forming speed and high straightness of drilling: Drilling is an effective superposition of three drilling forces: vibration, rotation and pressurization, especially vibration Action sound wave, not only effectively broken rock, but also make the rock and soil drainage and liquefaction, so as to obtain Get a higher drilling speed. The drilling speed is usually 20-30 m / hour, more rapid than the conventional rotary drilling side Method is more than 5 times faster. The drill hole has high straightness and deviation of less than 1%. Good fidelity of rock and soil samples. Sound drilling can be collected in overburden and soft bedrock with large diameter, strong representation, good fidelity Continuous rock and soil samples without mixing layer.Perturbation is minimized and is especially suitable for application in the original state of acquisition Samples and pollution-free samples.
- Less environmental pollution, it is a green construction method: Normally, sonic drilling is done without mud or slurry treatment agentLiquid, less water or no water, drilling waste is 70%~80% less than conventional drilling, Thus, the environmental pollution of drilling fluid is reduced. In addition, the construction process of environmental protection, onstruction noise Low, has little impact on the surroundingenvironment.
- Good construction safety: The acoustic drilling adopts the casing follow-up wall protection technology, and the casing follow-up and sampling are carried out simultaneously. The outer tube can protect the hole wall well and prevent it from collapsing. It also isolate the aquifer, Avoid cross-contamination. Because of the protection of the outer casing, So it Is not afraid of stuck drilling, buried drilling, drilling Less accidents in the process hole.
- Various construction techniques: The rope drilling process can be used to achieve sampling without drilling; single pipe and single movement Double-tube sampling and drilling. Efficient continuous drilling with a larger diameter casing (4-12 inches).
- Low drilling costs: Foreign sonic drilling machine construction, generally requires drilling more than 100 meters every day, because of drilling Fast speed, shorter construction cycle and lower labor costs; no mud and less drilling Access, less material consumption.
Product Parameters
Specification
| Model |
|
YGL-S200 |
| Weight |
kg |
13000 |
| Overall Dimension(L*W*H)(during transportation) |
mm |
8100*2300*3270 |
| Ambient temperature |
°C |
-10~38 |
| Specification of drill |
|
|
| Borehole depth |
m 200 |
| End borehole diameter |
mm |
100-200 |
| Angle of drill |
° |
0~ -90 |
| Drill head output(Japanese imported originally) |
|
|
| Rotary speed |
|
0-52/0-103 |
| Max output torque |
N.m |
9300/3900 |
| Feeding stroke |
|
3500 |
| Feeding force |
KN |
50 |
| Lifting force |
KN |
60 |
| Vibrator force |
KN |
75 |
| Impact Frequency |
CPM |
6000 |
| Winch max lifting force |
T |
2.5 |
| Engine/diesel |
|
QSB5.9-C190 |
| Engine power |
KW |
160 |
| Max rotary speed |
rpm |
2200 |
| Grounding pressure |
MPa |
<0.05 |
| Climb ability |
° |
≯20 |
| Width of crawler plate |
mm |
400 |
Working Photos
Company Profile
Wuxi Jinfan Drilling Equipment Co., Ltd. (hereinafter referred to as "Jinfan") founded in 2003, is located in the Meicun Industrial Zone of Wuxi New District, with business covering more than 30 countries and regions worldwide, including Germany, Canada, etc,
Jinfan is especially devoted to research & develop, manufacture and sell anchoring drilling machine, sea engineering geological exploration drilling rig, core drilling machine and RC drilling rig, as well as their necessary accessory tools, apparatus and so on.
Jinfan offers good service to all customers both at home and abroad with tremendous technical strength and high quality of products. It provides customer at any time with technical consultation and technical service in helping the customers to select the type of equipment, to choose necessary accessory drilling tools, to provide efficient drilling technique to customers, to complete technical design of anchoring and reinforcing project, as well as to undertake construction, etc.
Jinfan sincerely hopes to establish wide contact with all its potential customers both in China and the rest part of the world. Enquires and orders are welcome.
Certificates
Foreign Clients
Exhibitions
Workshop
FAQ
1. Are you a trading company or a manufacturer?
We are a professional manufacturer. Our factory mainly produces ocean engineering drilling rigs, core drilling rigs, anchor drilling rigs, RC drilling rigs, etc. The products have been exported to more than 30 countries and regions around the world and enjoy a high reputation all over the world.
2. How is the quality of your machine?
Our products pass strict quality inspections before they leave the factory to ensure that they are qualified before they are shipped.
3. How to inspect the goods?
1) Support customers to come to the factory for on-site inspection.
2) Support customers to designate third-party companies to inspect goods.
3) Support video and photo inspection.
4. Do you have after-sales service?
Yes, we have a dedicated service team that will provide you with professional technical guidance. If you need, we can send our engineers to your workplace and provide training for your employees.
5. How about quality assurance?
We provide a one-year quality guarantee for the main machine of the machine.
6. How long is your delivery cycle?
1) In the case of stock, we can deliver the machine within 7 days.
2) Under standard production, we can deliver the machine within 1 month.
3) In the case of customization, we can deliver the machine within 2-3months.
){kind=link}